Feuling M8 Oil System Kits

In New Releases, Product News by Rollies Speed Shop

FEULING® have combined all the necessary components to upgrade your M8® engines oiling system in one convenient kit. Available in HP+® or RACE SERIES® variants, FEULING® oiling system kits increase oil pressure, oil volume, engine oil flow and return oil scavenging.

  • Quieter and smoother engine operation
  • 27% more pressure and scavenge gear volume over stock
  • 42% more scavenge volume through port sizing, matched passages and holes to the engine case
  • 68% more oil volume to the crankshaft and connecting rod bearing
  • 15-25 degree cooler engine temperatures
  • 15-30 degree cooler oil temperatures
  • 10-30 more PSI of oil pressure
  • Reduces wet sumping, blow by and oily air cleaners
  • Test results show 2 HP gain and 2 ft/lbs of TQ gain to the rear wheel on Milwaukee Eight
  • NOTE: FEULING test results show as much as 50% reduction of engine sump oil level.

Both HP+® and RACE SERIES® kits include FEULINGS® HIGH FLOW billet camplate made from 7075 aluminum which is 50% harder and stronger than the factory or Feuling OE+ camplates. FEULING® increases oil flow and volume by enlarging the oil pump reservoirs and critical oil passages including matching the oil port holes throughout the camplate to the port holes in the engine case which increases engine oil flow to the lifters, piston cooling jets, crankshaft and rod bearings.

HP+® SERIES M8 Kits include a billet 6061 aluminum high volume oil pump, FEULING® HIGH FLOW camplate, HP+® Hydraulic roller lifters and cam installation kit, cam bearing, cam/crank bolts and washers, engine and fastener assembly lube.

RACE SERIES® M8 kits include FEULINGS® HIGH FLOW billet camplate made from 7075 aluminum which is 50% harder and stronger than the factory camplates. FEULING® increases oil flow and volume by enlarging the oil pump reservoirs and critical oil passages including matching the oil port holes throughout the camplate to the port holes in the engine case which increases engine oil flow to the lifters, piston cooling jets, crankshaft and rod bearings.

HP+® and RACE SERIES® kits are available for water-cooled and oil-cooled M8 engines. Both kits are compatible with chain drive and gear drive cams. If using gear drive cams a Feuling Block-off Plate (part #FE-8016) is required.