944 Ultra Low Series with Quik Preload System, 12.5in. Standard Spring Rate Rear Shock Absorbers – Black. Fits Touring 1980up

With QPS, it’s no longer necessary to take saddlebags off to adjust the sag when going from a single rider, to a two up riding configuration, and then back to a solo riding experience. This means the suspension can be set up for changes in weight load in less than a minute

* By combining a flat-wire spring with a progressive main spring, this 12.5″ shock has the ride height of an 11″ shock under the weight of the bike yet utilizes the full stroke of a 12.5″ shock as terrain demands it.

* Sits 2″ lower than a stock HD Touring model & provides the best ride a short shock can.

* Frequency Sensing Technology (FST) allows the shocks to sense the

frequency of a bump and automatically adjust damping for superior ride quality.

* Sealed gear driven preload adjuster with 17mm of adjustment

* Adjust spring preload in seconds without removing saddlebags

* 30 complete turns of preload fine adjustment

* Hand-built, tuned & dyno’ d in Progressives facil ity.

Tech Tips:-

* Standard Spring Rates are recommended for riders that weigh under 110kg.

* Heavy Duty Spring Rates are recommended for riders that weigh over 110kg, or for riders who ride 2 up over 50% of the time.

* If you are purchasing longer or shorter suspension, confirm that changing your Suspension travel will not cause clearance issues.

* Performance Suspension Upgrades provide better handling through a Stiffer more controlled Ride.

Proudly Made by Progressive Suspension !

MFR PART No: 944-4001UL-QPS
ROLLIES PART No: PS-944-4001UL-QPS